Metal profiles applicable for non-load bearing wall- and ceiling systems.
Heradesign single layer magnesite-bonded wood wool acoustic panel as decorative and acoustically effective sub-ceiling wand cladding fore use in interior rooms, and roofed outdoor areas.
The Promatect fire resistant construction boards are designed to contain fire within a compartment of a building by acting as a barrier to stop the spread of heat, smoke, fire and gases.
Ideal for interior- and ship building is the Curved Plywood in different bending radius or covered with a top layer of HPL or wood veneer.
The Frencken edge sealer has especially been developed for sealing plywood, waterproofing plywood edges will significantly extend the life of plywood in any environment where water is present.
The randge of Knauf jointing and finishing products have been developed to give you the best results for finishing your plasterboards products.
Houtwerf has the possibility for different treatments of plywood such as cutting, CNC machining, HPL overlaying and other treatments according to your wishes/specifications.
Description profiles for wall and ceiling systems.Type WMS-U: U-track profiles, gauge 0.6 mm galvanised steel,. Flange height 40 mm. Manufactured according to DIN 18182 and EN 14195. The U-tracks are also available with...
See article
Description: single layer layer magnesite-bonded wood wool acoustic panel (fibre width 2 mm).Application: as decorative and acoustically effective sub-ceiling and wall cladding for use in interior rooms and roofed outdoor areas,...
See article
Description: silicate based fire protective construction board with cement binder, resistant to moisture, of stable dimensions, large format and self-supporting. It is produced with quality assurance according to the standard ISO...
See article
Description: light silicate fire resistant construction board with Promaxon binder, resistant to moisture, of stable dimensions, large format and self-supporting. It is produced with quality assurance according to the standard...
See article
Description: curved plywood standard made in Okoume or MDF. The plywood can be coverd with a toplayer of HPL or wood veneer.Applications: for interior- and ship building.Bonding: IW-67.Thickness: 12/13 mm, 15/16 mm en 18/19...
See article
Description: especially developed for sealing plywood, It is a ready for use, 1-component system with a high sealing capacity and very short processing and drying times. The edge sealer is the better and faster alternative for...
See article
The randge of jointing and finishing products have been developed to give the best results for finish with the minimum of effort.Knauf Jointing & Finishing Materials manufactured from the highest quality...
See article
