This collection contains following sorts of decorative laminate with their specific characteristics. The quality varieties are according to EN438:2005.
Formica® Laminate
Quality HPL/EN 438-3 HGP:
- Horizontal, postformable decorative high pressure laminate for general use (nominal thickness 0,7 mm).
- Download here the productsheet of Formica® HGP quality.
Quality HPL/EN 438-3 HGS: - Horizontal, standard decorative high pressure laminate for general use (nominal thickness 0,7 mm).
- Download here the productsheet of Formica® HGS quality.
Quality HPL/EN 438-3 HGF: - Horizontal, fire retarding decorative laminate for general use (nominal thickness 1,0 mm).
- Download here the productsheet of Formica® quality.
Quality HPL/EN 438-8 ATP: - Pearlescent, thin postformalbe decorative high pressure design laminate (nominal thickness 1,2 mm).
Quality VFP: - Vertical, fire retarding, postformable decorative high pressure laminate (nominal thickness 0,7 mm).
VFP is not present in the classification system EN 438
ColorCore® by Formica Group
Quality HPL/EN 438-9 BTS:
- Standard thin decorative high pressure laminate with colored core.
Quality CAR: - Wear resistant thin decorative high pressure high gloss laminate with colored core.
Quality CAR is not present in the classification system EN 438
Formica® Compact
Quality HPL/EN 438-4 CGS:
- Compact, standard decorative high pressure laminate for general use. EN 13501 euro class D-s2, do.
Quality HPL/EN 438-4 CGF:
- Compact, fire retarding decorative high pressure laminate for general use. EN 13501 euro class ≥ 6 mm B-s1,do.
AR Plus® by Formica
Quality PAR:
- Wear resistant, postformable decorative high pressure high gloss laminate.
Quality FAR: - Wear resistant, fire retarding decorative high pressure high gloss laminate.
PAR and FAR are not present in the classification system EN 438.
DecoMetal® by Formica Group
Quality HPL/EN 438-8 MTF:
- Fire resistant, thin decorative high pressure design laminat in metal.
Quality HPL/EN 438-8 MTP: - Metal, postformable, thin decorative high pressure design laminate in metal.
MTF and MTP qualities are recommended for vertical applications.
DecoMetal®-laminate meets the EN438-2005-requirements. Quality MTF and IMO-/MED- and USCG-certification regarding to fire safety.
Specific information on demand.
Classification of fire resistance according to EN 13501-1:2010-01 B-s1, d0.
Kwaliteit VGS:
- Verticaal, standaard decoratief hogedruklaminaat voor algemeen gebruik (nominale dikte 1,3 mm).
> M5316 Korten, heeft een oppervlak in melamine ijzerdeeltjes. Een zeker magnetisch effect is mogelijk. Tijdens de verwerking kunnen vonken ontstaan.
› M5316 Koren, is een handgemaakt ontwerp en elke plaat is uniek. Geen twee bladen zijn dezelfde en dat is eigen aan het ontwerp en het productieproces.
Formica® Magnetic Laminate
Quality MLB:
- Standard magnetic laminate.
MLB is not present in the classification system EN438.
Formica Ligna®
Quality VVS:
- Veneer, vertical, standard (nominal thickness 1,0 mm).
Quality VVF: - Veneer, vertical, fire retarding (nominal thickness 1,0 mm).
Classification of fire resistance according to EN 13501-1:2010-01 C-s2, d0 IMO-/MED & USCG-certification regarding to fire safety according to FTP-code Annes 1, Part 5, Nr. 2.1 and Part 6 Nr. 2.1
Formica Ligna® in VVF quality is available on demand, with conditions regarding to minimal purchase and deliverly time.
VVS en VVF are not present in the classification system EN 438.
Younique® by Formica Group
Quality HPL/EN 438-3 HGP:
- Horizontal, postformable decorative high pressure laminate for general use (nominal thickness 0,7 mm).
Kwaliteit HPL/EN 438-3 HGS:
- Horizontal, standard decorative high pressure laminate for general use (nominal thickness 0,9 mm).
Quality HPL/EN 438-4 CGF*: - Compact, fire retarding decorative high pressure laminate for general use (nominal thickness 3-20 mm).
Quality HPL/EN 438-4 CGS: - Compact, standard decorative high pressure laminate for general use (nominal thickness 3-20 mm).
Quality VFP*: - Vertical, fire retarding postformable decoratvie high pressure laminate (nominal thickness 0,7 mm).
VFP is not present in the classification system EN438.
*Only available in silk screen printing.